PARAMETERS

Model			LDR10K 180X 12-4	LDJ10K 05X 12-4C	LDJ10K 05X12H-4C	LD*10K 05#12
Continuous operating Voltage    Uc			180V	5V	5V	5V
Nominal discharge current (8/20μs)    In			5kA
Max. Discharge Current (8/20μs)   Imax			10kA
Protection Level    Up 8/20μs	Line- Out- Conductor		≤400V	≤30V	≤40V	≤30V
	Out-conductor To Grounding		≤120V	≤100V	≤100V	≤100V
Adapt transmission rate			10Mbps	10Mbps	10Mbps	10Mbps
Connector		IN	R J 1 1 ( F )	R J 4 5 ( F )	R J 4 5 ( F )
		OUT	R J 1 1 ( F )	R J 4 5 ( F )	R J 4 5 ( F )
Protection mode (Line)			3 , 4 & 2 , 5	1 , 2 & 3 , 6	1 , 2 & 3 , 6	Two lines
Insertion Loss			≤0.5dB	≤0.5dB	≤1dB	≤0.5dB
Dimensions			483mm×94mm×44.5 mm
Working environments			Temperature -25～+65℃， Humidity relative≤95％ (25℃) ,  Altitude≤3km

 

‘*’ for connector type:

Connector type	BNC	SMB	N	TNC	NEC	L9	CC4	F
*	B	S	N	T	E	L	C	F

 

 ‘＃’ for I/O mode: 

I/O mode	Male / Male	Male / Female	Female / Female	Female / Male
＃	Y（R）	M（Q）	X（E）	W（U）

 

INSTALLATION

• Connect in series between protected equipment and signal channels. Should connect tightly to the protected equipment
• Connect IN-port to signal channels and OUT-port to protected equipment.
• Connect lead to grounding bar dependably.
• No special maintenance needed. If malfunction occurs in operating system, please remove the protector, and then check the system.
• If system recovered, that means the protector has been damaged and must be replaced