PARAMETERS
|
Product Model |
TDN20K20#-T |
TDD20K20#-T |
|
Working frequency range |
800¡«1000MHZ & 1700¡«2500MHZ |
|
Nominal discharge current In |
10kA (8/20¦Ìs) |
|
Max. discharge Current Imax |
20kA (8/20¦Ìs) |
|
Protection level Up(8/20¦Ìs) |
¡Ü30V |
|
Impact defense Voltage 1kv/us |
¡Ü60V |
|
VSWR |
¡Ü1.15 |
|
Insertion Loss |
¡Ü0.15dB |
|
Connector type |
N |
7/16(DIN/L29) |
|
Dimension (mm) |
96X84X30 |
89X84X30 |
|
Working environments |
Temperature -25¡«+65¡æ£¬Humidity relative¡Ü95£¥(25¡æ) |
|
Reserve the right for technology revises |
|
Notice: ¢Ú,# represent for different input/output type, meaning shows as follows: |
|
I/O |
Y |
M |
W |
X |
|
# |
J/J |
J/K |
K/J |
K/K |
INSTALLATION
1. Connect the protectors in series to the antenna circuit, and the protector should be closed to the equipment as much as possible.
2. Make connection lead as short as possible (lead section area not more then 2.5mm²), and another port connect protector with grounding bar reliably.
3. Using outdoors must avoid rainwater immerging into the protector to erode the inner components.
4. No special maintenance needed. When malfunction occurs in operating system, remove protector, and check the system. If system recovers, it means the protector has been damaged and must be replaced.
